Safety Valves
1 Warranty covers manufacturing defects in valve body, spring mechanism, and seat.
2 Functional failures under specified pressure ratings due to design/manufacturing defects.
3 Coverage against leakage caused by faulty sealing components.
4 Repair/replacement of defective valve within warranty period under normal usage.
1 Damage caused by operation beyond rated pressure/temperature limits.
2 Wear and tear of seals, seats, or springs due to normal service life.
3 Corrosion, scaling, or erosion caused by incompatible process media.
4 Improper installation (incorrect orientation, lack of proper inlet/outlet piping)..
1 Warranty covers defects in safety mechanism, spring/lever assembly, and body.
2 Coverage against manufacturing faults that prevent valve from opening at set pressure.
3 Protection against leakage due to defective sealing surfaces.
4 Replacement/repair of defective valve under recommended operating conditions..
1 Failure due to tampering, over-adjustment, or alteration of factory set pressure.
2 Damage caused by exposure to corrosive or abrasive fluids not specified.
3 Seat or disc wear resulting from repeated normal pressure cycling.
4Improper handling, storage, or installation (e.g., overtightening connections)..
1 Warranty covers defects in diaphragm, spring mechanism, and valve housing.
2 Functional failure to relieve vacuum within specified limits due to manufacturing defect.
3 Coverage against leakage caused by defective sealing.
Repair or replacement of faulty unit under recommended service conditions..
1 Damage due to incorrect installation or operation outside design vacuum range.
2 Wear and tear of diaphragms, seals, or springs from normal operation.
3 Corrosion or chemical attack from incompatible process fluids.
4 Malfunction caused by contamination, dirt, or lack of maintenance..
1 Warranty covers defects in regulator body, internal mechanism, and control spring.
2 Coverage for failure to maintain set pressure/flow due to manufacturing defect.
3 Assurance against leakage under rated pressure and temperature conditions.
4 Repair/replacement of faulty valve components within warranty terms.
1 Damage due to incorrect adjustment or exceeding rated pressure/flow limits.
2 Normal wear of seats, seals, or diaphragms.
3 Clogging or malfunction caused by unfiltered/dirty media.
4 Corrosion or erosion resulting from use with incompatible fluids..